Texas Instruments

Description

1.2. Notational Conventions. The following notation is used when SBS commands and data flash values are mentioned within a text block: SBS commands are set in italic, e.g., Voltage. SBS bits and flags are capitalized, set in italic and enclosed with square brackets, e.g., [COV]. Data flash values are set in bold italic 1. Types of Cell Imbalances. 1. State of Charge Imbalance. Charging cells to different states of charge (SOC) causes this type of imbalance. For example, given a configuration of 3 x 2200-mAh cells (QMax), if one cell is discharged by 100 mAh (Q1), the second by. 100 mAh, and the third by 200 mAh from a fully charged Automatic Cell Imbalance Correction with External. Enable Control. 30-mV Enable, 0-mV Disable Thresholds. Typical. External Capacitor-Controlled Delay Timer. External Resistor-Controlled Cell Balance Current. Low Power Consumption ICC < 3 A Typical. (VCELL(ALL) < VPROTECT). Internal Cell Balancing Jun 24, 2014 The Gauge Development Kit (GDK) is a complete evaluation system for any single-cell fuel gauge developed by Texas Instruments Incorporated. The GDK is a single printed circuit board (PCB) equipped with a programmable load, programmable charger, and an integrated EV2400 for PC interaction via. Introduction. There are systems in which it is desirable to control an I2C device with an SMBus host, to simplify the systems and reduce cost. Generally it is possible to do this, but there are hardware and software differences between the 2 buses that must be considered to achieve compatibility. This paper examines.