Texas Instruments

Description

version are presented The COP420 microcontroller is used as the control element in all cases However any of the. COPS family of microcontrollers could be be available to enter this number If one is testing a COP420 or COP421 near its upper limit it would be wise to do the SK sync operation at a lower rate and then FIGURE 8 NM93C06A COP420 Interface. The following points have to be considered. 1 For NM93C06A the SK clock frequency should be in the. 0 kHz 250 kHz Clock and Power on 1 Wire. Figure 29. Digital Link and Sample Controlling Software for the Serially Oriented COP420 and the Bit. Programmable I/O INS8048. There is an option on the COP420 420L and 410L parts called RAM Keep-Alive that provides a separate power supply to the RAM area of the chip via the