(4/5) based on 5 customer reviews
Description
MPX2010GP. CASE 344B-01. MPX2010DP . CASE 344C-01. MPX2010GS. CASE 344E-01. MPX2010GSX. CASE 344F-01. MPXM2010D/DT1. CASE 1320- 02. INTRODUCTION. This application note presents a design for a low pressure evaluation board using the Freescale Semiconductor, Inc. MPX2010 series J8 is installed only when an MPX2010DP pressure sensor is used on the system. The purpose of wire jumper J8 will be explained later in the text. Jumpers J4 FUNCTION. The evaluation board shown in Figure 1 is designed to translate pressure, vacuum, or differential pressure into a single ended, ground referenced cost, high volume production, technical support. Hospital beds. MPX2010DP , MPX5010DP. Robust packaging, high sensitivity, fully amplified, technical support.
| Part Number | MPX2010DP |
| Main Category | Sensors, Transducers |
| Sub Category | Pressure Sensors, Transducers |
| Brand | Texas Instruments |
| Description | SENSOR PRESSURE 1.45PSI MAX |
| Series | MPX2010 |
| Pressure Type | Differential |
| Operating Pressure | 1.45 PSI (10 kPa) |
| Output Type | Wheatstone Bridge |
| Output | 0 mV ~ 25 mV (10V) |
| Accuracy | ±1% |
| Voltage - Supply | 10 V ~ 16 V |
| Port Size | Male - 0.19" (4.93mm) Tube, Dual |
| Port Style | Barbed |
| Features | Temperature Compensated |
| Termination Style | PCB |
| Maximum Pressure | 10.88 PSI (75 kPa) |
| Operating Temperature | -40°C ~ 125°C |
| Package / Case | 4-SIP Module |
| Supplier Device Package | - |
| Image |  |
Hot Offer
MPX2010DP
TI/ST
200
0.79
HK KK Int'l Co.,Limited
MPX2010DP
TexasIns
30000
1.8475
Cinty Int'l (HK) Industry Co., Limited
MPX2010DP
TI/CC
8500
2.905
SUNTOP SEMICONDUCTOR CO., LIMITED
MPX2010DP
TI?
107720
3.9625
Semic Pte. Ltd
MPX2010DP
TI-BB
2888
5.02
Huajiaxin Electronic Technology (Hong Kong) Co., Limited
