Description
Question about low temperature characteristic of OPA561 . OPA561 evaluation circuit. Ta=- 40 with 47pF. Ta=-40 without 47pF. Oscillation 0.75MHz. TI OPA561 is used as a line driver and to filter the PWM signal. TI OPA353 is used to filter the incoming signal (active bandpass). A coupling circuit with difference between the DAC setpoint and the actual current. This signal drives the external linear power amplifier, which is an OPA561 . Figure 12. Laser Control OPA561 . GENERAL-PURPOSE LINEAR POWER. 15V, 17MHz, 50V/ s. BOOSTER. 1. Please be aware that an important notice concerning availability, Jun 15, 2006 2 on-chip PWM outputs are summed together by the analog circuit (optional). Signal filtered and amplified by. OPA561 line driver. 0. 0.5. 1.
Part Number | OPA561 |
Brand | Texas Instruments |
Image |
OPA561
TI/ST
5998
1.74
Y.H.X ELECTRONIC TECHNOLOGY HK LIMITED
OPA561
TexasIns
5998
2.71
Huajiaxin Electronic Technology (Hong Kong) Co., Limited
OPA561
TI/CC
5998
3.68
BOYU ELECTRONIC TECHNOLOGY LIMITED
OPA561
TI?
6405
4.65
MASSTOCK ELECTRONICS LIMITED
OPA561
TI-BB
5998
5.62
JINRUIXIN TECHNOLOGY (HONG KONG) LIMITED