Texas Instruments

Description

The TLV3011 is a low-power, open-drain output comparator; the TLV3012 is a push-pull output comparator. Both feature an uncommitted on-chip voltage reference. Both have 5 A. (max) quiescent current, input common-mode range 200mV beyond the supply rails, and single-supply operation from. 1.8V to 5.5V. The IN+. DBV PACKAGE. (TOP VIEW). TLV3011-EP, TLV3012 -EP. SGLS349 OCTOBER 2006. NANOPOWER 1.8-V SOT23 COMPARATORS WITH VOLTAGE REFERENCE. . Battery-Powered Level Detection. . Controlled Baseline. . Data Acquisition. One Assembly/Test Site. . System Monitoring. One Fabrication Site. 4. Introduction. The TPS65986 device is a stand-alone USB Type-C and power- delivery (PD) controller providing cable- plug and orientation detection at the USB Type-C connector. Upon cable detection, the TPS65986 device communicates on the CC wire using the USB PD protocol. When cable detection and USB-PD Mar 21, 2014 Dealing with unexpected power loss. Inadvertent or unexpected loss of power can cause a number of system level problems. Memory loss, uncontrolled program status and indeterminate processor state are just a few of the issues which can occur during catastrophic power failure. Power-fail recovery is Dec 7, 2009 The ISL21440 is a micropower, FGA reference, and comparator on a single chip. Drawing less than 6.5 A supply current across the full operating temperature range, the ISL21440 operates from a single 2V to 11V supply and can also be used with split bipolar supplies. The ISL21440s on-board reference