Texas Instruments

Description

700 g/cm 3M TM-2313 (5). Ink/PET(4). Ambient Physical Properties. (1) For a given application, values may differ depending on particular substrate material or type of circuitry. (2) Measured for gold/nickel/copper polyimide flex circuits bonded resistance in the measurement due to the circuit lines. (4) Results listed for minimum bonding conditions of 160 C x 5 sec. Higher values are possible with increase in bonding temperature or time. (5) 3M internal test method TM-2313 based on 900 gf/cm 3M TM-2313 (6) bare-PET(7). Ambient Physical Properties. (1) For a given application, values may differ depending on particular substrate material or type of circuitry. (2) Measured for gold/nickel/copper polyimide flex circuits Jan 2, 2010 3 stereo inputs with gain selection, range from 0dB to +11.25dB in 3.75dB/step. Master volume from 0 dB to -78.75dB in. 1.25dB/step. Speaker attenuator for balance and fader, range from 0dB to -38.75dB in 1.25dB/step. 1.1.3. Port A (PA2..PA0). Port A is a 3-bit bi-directional I/O port with internal pull- up resistors (selected for each bit). The. Port A output buffers have symmetrical drive characteristics with both high sink and source capability, except PA2 which